START

Prepare a place to assemble the PURA bench. Make sure you have enough space to turn comfortably and the surfaces you will be using are clean. We recommend using a carpet or blanket on which the parts can be safely assembled.

STEP 1

Unpack all parts. Check the number of parts included in the shipment.

STEP 2

Place the seat element on a flat surface, top side down, as shown in the attached illustration.

STEP 3

Fit each leg into the holes one by one. Perform this step one at a time, starting from the outer legs.

STEP 4

Each leg should be screwed to the seat using the included Allen screws. Screw the screws into the holes. Make sure you tighten all four screws for each leg.

STEP 5

Check if there is any play after screwing the legs in place. If they are not there and everything fits exactly together, you can turn the bench and put it on its feet.

STEP 6

Due to the weight of the PURA bench and your safety, we ask that you rotate it with the help of another person. You can grab the previously screwed-on legs.

STEP 7

It was simple. Congratulations. The PURA bench is ready for use.