BEGINNING

Prepare a place to assemble your BOLD desk. Make sure you have enough space for comfortable assembling and the surfaces you will use are clean. We recommend using a rug or blanket on which the parts can be put safely.

STEP 1

Unpack all parts. Check the quantities of parts in the shipments.

STEP 2

On a flat surface, put the top with the mounting holes upwards. Exactly as shown in the attached illustration. Insert the dowels into the holes as shown.

STEP 3

Start assembling the connecting walls of the tops. Place the walls on the dowels protruding from the top.

STEP 4

Then insert further dowels into the holes in the walls. The through-holes in the walls will be used to insert the screws. Pay attention to this when selecting the holes so that the dowels are inserted into the blind recesses.

STEP 5

It is time to connect the tops together. Place the bottom top on the protruding dowels. Remember that the top should be applied as shown in the illustration.

STEP 6

After placing the bottom countertop, use screws to attach it. Insert long screws into the holes and tighten so that the tops and walls are well pressed together.

STEP 7

Prepare the legs. Screw the threads into the threaded holes in the legs. Screw in until tight. Repeat the same step for all four legs.

STEP 8

Place the legs with protruding threads against the side of the previously screwed top. Insert the threads into the holes located on the sides of the tops.

STEP 9

Note that the threads have appeared in the recesses of the top. Now place the Moonline connectors over the protruding threads as in the attached illustration.

STEP 10

Then screw on the nuts pressing the Moonline connectors to the surface of the countertop. Use the included wrench to do this. Perform this action for each leg. Remember that both the upper and lower tops must be tightened in the same way.

STEP 12

Ask someone to help you and turn the desk carefully so that it stands on its feet. Remember not to carry the desk by yourself. This can be dangerous and result in injury. The desk including the legs weighs about 28kg.

STEP 13

Congratulations, your new BOLD desk is ready for use.