Manual
PIATO
- PIATO 120x60
- PIATO 160x80
BEGINNING
Prepare a place to assemble the PIATO desk. Make sure you have enough space for assembling comfortably and the surfaces you will use are clean. We recommend using a rug or blanket on which the parts can be safely folded.
STEP 1
Unpack all parts. Check the quantities of parts in your shipments. In total, there should be 3 boxes containing the following: 1 pc. desk top, 2 pcs. Desk leg, 1 pc. Allen key and 16 pcs. M6 screws.
STEP 2
On a flat surface, lay the tabletop with the mounting holes facing up. Exactly as shown in the attached illustration.
STEP 3
Start assembling the legs. Start assembling the legs. Choose any leg and place it on the countertop so that the holes in the leg and the threaded holes in the countertop coincide. You can start on either the left or right side because both legs have the same hole spacing.
STEP 4
Once you've attached the legs, you can start screwing them using the included screws. Do this for the left and right legs in turn. Of course, once you're done, make sure all the screws are tight. There should be 16 of them.
STEP 5
The desk is now ready to be turned. Be sure to ask someone to help you. You can turn the desk by putting it on its legs.
STEP 6
Congratulations, your new PIATO desk is ready to use.
PIATO 160x80
VIEW