START

Prepare a place to assemble your NEO Low or NEO High table. This manual will guide you step-by-step on how to assemble your new table.

NEO LOW / STEP 1

Let's start with the LOW version of the table.

NEO LOW / STEP 2

Unpack all the parts. Arrange them so that you have an overview of all the parts. Check the quantities with the instructions.

NEO LOW / STEP 3

Each leg has a screw with an M8 metric thread.

NEO LOW / STEP 4

Place the tabletop on a smooth and clean, preferably soft surface with the mounting plates facing up. The table top has 3 threads into which you need to screw the legs.

NEO LOW / STEP 5

Screw in the legs until they stop. Without using excessive force. The legs should be stationary and at an angle of 90* to the countertop. After tightening the legs. Turn the table around and place it on its legs.

NEO LOW / STEP 6

NEO LOW table is ready to use. For more information on using our furniture and care, please visit: Care and Use

NEO HIGH TABLE

To assemble the NEO HIGH table, follow the instructions below.

NEO HIGH / STEP 1

Unpack all parts and place them on a flat surface. Check the quantity of the shipment.

NEO HIGH / STEP 2

We recommend putting something soft under the tabletop to securely screw the legs to it.

NEO HIGH / STEP 3

Each leg has a thread with which you will be able to screw the leg to the countertop. Rotate the threaded leg until the plane of the leg is evenly pressed against the surface of the tabletop. Use moderate force. Make sure that the legs are tightened in a way that prevents its movement.

NEO HIGH / STEP 4

Check if the legs are perpendicular to the plane of the tabletop. If so, the table is ready to use and can be turned.

NEO HIGH / STEP 5

Thank you for choosing our products. More information on the use and care of our furniture can be found here: Care and Use